Concrete pump hire for narrow access

Builders and homeowners who need narrow access concrete pump hire usually have the same problem. The concrete has to go somewhere a lorry can't reach: behind the house, down a steep garden, through a gate in an old town street. Our answer is a compact Putzmeister static pump on a lorry, with its own operator. It is small enough to fit where a big boom pump can't, and it still pushes concrete up to 400 metres along the line.

Narrow access concrete pump or mini pump?

Our narrow access concrete pump is a compact static pump mounted on a lorry, which parks as close as it can and feeds concrete through a line to the pour.

In the UK a mini concrete pump usually means a small pump on a trailer or tracks. Ours does the same job from the road, with more reach: up to 400 metres of line and 50 metres of height.

Compared with a big boom pump, it needs far less space to set up and no room to swing an arm. That makes it the right tool for villa plots, gardens, courtyards and basements. Builders in the UK often call this type a line pump. Whatever the name, the idea is the same: the mixer delivers to the pump, the pump delivers to you.

Narrow access on the Costa Blanca

Narrow access is normal here, from single-track urbanisation lanes to old town streets and gated plots.

Many villas along the coast were built on hillsides, with steep, winding roads, tight hairpins and a gateway barely wider than a car. Pools and patios are often at the back or on a lower terrace. In the old towns of places like Altea, Jávea or Villajoyosa the streets were simply never made for a concrete lorry. In all these cases the pump goes as close as it can get, and the line runs through the gate, along the side path, down the steps or over the wall.

• Pools and patios behind the house
• Gardens on lower terraces of a sloping plot
• Roof terraces and upper floors, up to 50 metres high
• Courtyards and town houses with no vehicle access
• Basements and footings next to existing buildings

Why not just use barrows?

A pump places the concrete in one continuous pour, which is faster and gives a better result than barrowing.

Barrowing a few cubic metres up and down a steep garden takes a team of people and a lot of hours. Concrete starts to set while you are still on the first half, and the joins between loads can show or weaken. With a pump the concrete arrives fresh and evenly, so the whole slab can be levelled and finished in one go. The pump handles 16 to 18 m³ an hour, so a small job is often done in under an hour of pumping.

Always with an operator

We only hire our truck-mounted pump with our own operator, never on its own.

The operator sets up the pump, primes the line with a cement slurry, controls the flow and moves the line during the pour. We always come with two people and usually finish the concrete ourselves; if you only want the pump with an operator, that is possible too. At the end he cleans out the pump and lines and makes sure nothing is left on your drive or in the street. Customers often comment on that last part.

Don and Ari came on time very clean and a pleasure to work with

Pro fix Costa blanca

Check your access in two minutes

Send us a photo of the street, the gate and the spot where the concrete goes, and we will tell you where the pump can stand.

A few pictures usually tell us enough. We then give you one fixed price for the pump, operator, lines, setting up and cleaning up. We order the concrete from the plant and put it on the same quote. See how we put that together on our concrete pump prices page, or see our standard concrete pump hire with operator if access is easy. Typical narrow-access jobs include concrete for a pool shell and a driveway or patio slab. WhatsApp: +34 633 361 962.